How to use self-pressurized liquid nitrogen tank
By：adminauthor：admin Date:2020-07-01 15:47 View：
There are two ways:
1) When filling liquid from the inlet/discharge valve and filling the container, first open the vent valve, connect the infusion metal hose to the inlet/discharge valve, open the inlet/discharge valve, then you can /Liquid medium is added to the drain valve. After filling, close the inlet/drain valve.
2) When filling the liquid from the screw plug of the liquid inlet and filling the container, first open the vent valve and unscrew the screw plug of the liquid inlet to add liquid medium from the liquid inlet. After the liquid is filled, the screw The plug is screwed into the liquid inlet.
When you use this container to store liquid medium, please close the inlet/drain valve and boost valve, and you must open the vent valve.
When you use this container to transport liquid medium, the opening and closing state of each valve should be the same as that during storage, and please fix the wheels under the container seat ring, and secure the container to the car with a rope.
If you want to output liquid from the container, please follow the procedure below.
(1) Close the vent valve
(2) Open the booster valve
(3) Observe the pressure gauge